|
 |
PTFE,
PFA and PP Beakers, Sample Cups and Lids Made
of fluoroplastic. With spout and reinforced rim, thick-walled,
smooth interior surface. A tight-closing lid with centering shoulders
made of fluoroplastic is additionally available. Sample cups
made of pure polypropylene. Ideal for keeping samples. |
 |
Digestion
Vessels Digestion vessels are made of pure, isostatically
pressed PTFE (TFM). TFM is a modified PTFE. These vessels are
suitable for samples up to max. 0.5 g. |
|
PTFE, PFA & FEP Bottles Made of
fluoroplastic. Thick-walled, smooth interior surface, with screw
caps. Wide mouth, narrow mouth and conical designs. |
 |
Wash
Bottles & Scrubber Columns PFA & FEP wash
bottles graduated. FEP scrubber columns are non-porous, transparent
and have universal chemical resistance. A fine-pore frit (approx.
3 µm, with a M 8x1 thread) disperses the gas that is
to be purified by washing. Scrubber columns are each equipped
with 2 PTFE fittings. |
|
PTFE & PFA Evaporating Dishes, Crucibles & Watch Dishes PTFE & PFA
evaporating dishes in conical and cylindrical shapes, with and without
spouts. Crucibles and watch dishes are PTFE with smooth internal surfaces |
|
PTFE
Condensers, Micro Reaction Vessels Liebig Condensers
and Liebig vacuum condensers
|
 |
Distillation
Accessories PFA
Reaction Vessels for small volumes, dropping funnels, flask thermometers,
stirrer bearings. Fluoroplastic distillation heads
Fluoroplastic packed columns and micro reaction vessels |
 |
PTFE & PFA
Round Bottom & Erlenmeyer Flasks Fluoroplastic,
non-porous with one standard ground joint center neck and additional
side neck(s) and GL-thread fittings. Allows assembly with temperature
probes, electrodes or tubes. Conditionally suitable for vacuum
depending on combined vacuum and temperature, e.g. at 30 mbar
and a temperature of 50°C. |
 |
PFA
Jars, PFA Vials, Jars with round or conical
bottoms.Non porous with screw caps and fittings. |
|
Chemically
Resistant Pump For quick, easy sampling or transfer
of liquids, even from sources that are not easily accessible.
Suitable for use with high viscosity liquids The sample is
only exposed to the PTFE tubing and the collection bottle.
Any glass bottles with GL 32 or GL 45 threads can be used
as collection bottles. |
 |
Chemically
Inert Sampling Bags Non-porous,
without plasticizer, absolutely inert, suitable for the storage
of gases and liquids. Supplied with a 6mm dia cylindrical port |
 |
PTFE & PFA
Test Tubes Fluoroplastic,
non porous with and without screw caps. Fluoroplastic vials |
| |
Threaded
Adapters For connecting different threads, suitable
for Merck bottles with GL 40 and for all PFA, PTFE bottles
and jars with a thread GL 40 or S 40. By using this adaptor,
dispensers or multiple distributors can be screwed tightly
on fluoroplastic bottles. |
 |
Plastic Reaction Vessel & Soxhlet Extraction Vessels Fluoroplastic
reaction vessel with smooth sides and flat bottom. Fluoroplastic Soxhlet
extraction apparatus |
| |
Culture
Bottles are made of boro
silicate glass. The fluoroplastic and stainless steel stirrer
is externally adjustable The medium is exposed only to the fluoroplastic
material. The screw cover for the center neck and the screw caps
for the two sidearms are made of a thermoplastic polyester allowing
the entire unit to be sterilized |
|
|
|
