Manufactured by KGW-Isotherm in Karlsruhe, Germany, the range of glass reaction vessels comprises over 400 versions; unheated, heated and heated with vacuum. The reaction vessels are available from 250 ml up to 20 liters with flat bottom, round bottom or "boiler end". Closing flanges use the widely accepted SCHOTT system with O-ring grooves. The bottom-outlet is with two different valve types; the laboratory valve "L" (the spindle is pressed while turning, " Torion type") and the industrial valve "J" (spindle is spring loaded and self regulating). Spherical ground joint S40 is also available.

Standard Reaction Vessels Systems

The standard reaction vessel system comprises the following units. It is mounted on a tubular frame.

Heatable boro-silicate glass reactor with a "J" valve, 10 mm, closed by spring pressure; metal adapter DN15, male thread. M16x1 connection for thermostat hose and PTFE flat gasket.
Lid with three angular side sockets NS 29/32, one center socket NS and an FEP coated O-ring.
Support frame.
V4A propeller stirrer, stirrer coupling, dynamic stirrer seal.

Standard Reaction Vessel Systems, Fixed
Standard Reaction Vessel System Moveable
Complete Reaction Vessel System using Easyframe, Fixed
Complete Reaction Vessel System using Easyframe, Moveable

Reaction Vessels

For Lids, Clamps, O Rings and Support Frames